Description ofelectronic potting compound silicone rubbers
RTV160 is a two-component room temperature cure potting compound with mix ratio of 1: 1, curing time can be accelerated by heating up, features with good flow ability and flame resistance. It's suitable for encapsulating of LED displayers, power module and electronics components, etc.
Features of electronic potting compound silicone rubbers
The product has low shrinkage and non-corrosive; the silicone rubber can be used for a long period at the temperature of -60ºC~200ºC with the characteristics of moisture-proof and waterproof, radiation-proof as well as weatherable and anti-ageing.
Technical datasheet of electronic potting compound silicone rubbers
Note: Mechanical and electrical performance data tested at 25° C 7 days after curing, relative humidity of 55%; All the tested data is average value.
Using Instructions of electronic potting compound silicone rubbers
Packaging & Shipping
Storage & Shelf life
Company Information
We are manufacturer, and specialized in manufacturing different hardness, different viscosity silicone rubber series, we are competitive in price with good quality.
Any futher questions,please feel free to contact sophie
MINGCHENG GROUP LIMITED
RTV160 is a two-component room temperature cure potting compound with mix ratio of 1: 1, curing time can be accelerated by heating up, features with good flow ability and flame resistance. It's suitable for encapsulating of LED displayers, power module and electronics components, etc.
Features of electronic potting compound silicone rubbers
The product has low shrinkage and non-corrosive; the silicone rubber can be used for a long period at the temperature of -60ºC~200ºC with the characteristics of moisture-proof and waterproof, radiation-proof as well as weatherable and anti-ageing.
Technical datasheet of electronic potting compound silicone rubbers
Item No. | MC-E48 |
Before curing | |
Appearance | A: brick red B: transparent |
Viscosity (mPa.s 25°C) | 3000~6000 |
Density (g/cm3 ) | 1.57±0.02 |
Working life (min 25°C) | 30 |
Curing time (hrs) | 24 |
Heat-up at 100°C (min) | 10 |
After curing | |
Hardness (shore A) | 50~60 |
Dielectric breakdown voltage kv/mm 25°C | ≥20 |
Volume resistivity ohm*cm | 1*1015 |
Tensile Strength Mpa | ≥0.6 |
Thermal conductivity cm/°C | 0.525*10-3 |
Working temperature °C | -30~200 |
Note: Mechanical and electrical performance data tested at 25° C 7 days after curing, relative humidity of 55%; All the tested data is average value.
Using Instructions of electronic potting compound silicone rubbers
1. Preparing: Clean up the coating surface, remove the rust, dust, oil dirt. |
| 2. Pouring: Weigh the silicone and catalyst correctly, mix silicone part A and part B thoroughly, pour onto the electronic components/surface after vacuum degassing. |
| 3. Curing: Room temperature cure or heat-up cure is both workable. |
4. It should be use up after open the package, the material must be kept in a cool place sealed well, and it should avoid from contact with moisture in the air. |
Packaging & Shipping
| Packaging Details | 20kg/drum or 200kg/drum |
Delivery Detail | 3 days after get paymen |
Storage & Shelf life
| 1. Keep it from strong sunshine, heat, and store in cool & dry place, well sealed. It has a shelf life of 12 months. |
| 2. It can be stroked and transported as non-dangerous goods. |
Company Information
We are manufacturer, and specialized in manufacturing different hardness, different viscosity silicone rubber series, we are competitive in price with good quality.
Any futher questions,please feel free to contact sophie
MINGCHENG GROUP LIMITED