Norsok M-710 requires Viton FKM HNBR O-ring

NORSOK M-710 requirements Viton FKM HNBR O ringHigh pressure AED/ EDR / RGD O-RINGSExplosive Decompression (ED)Rapid Gas Decompression (RGD)Anti-Explosive Decompression (AED)Explosive Decompression Resistant (EDR)NORSOK M-710 requirementsAED, EDR AND RGD O-RINGSExplosive Decompressio

Featured Products

NORSOK M-710 requirements Viton FKM HNBR O ring
High pressure AED/ EDR / RGD O-RINGS

Explosive Decompression (ED)
Rapid Gas Decompression (RGD)
Anti-Explosive Decompression (AED)
Explosive Decompression Resistant (EDR)
NORSOK M-710 requirements

AED, EDR AND RGD O-RINGS
Explosive Decompression (ED) is also known as Rapid Gas Decompression (RGD). This condition occurs after an elastomer is exposed to a gas laden fluid in the presence of high pressure. The pressure compresses the gas and forces it into the small spaces of the elastomer. If the rate of decompression happens quickly, the gas expands beyond the materials ability to contain the gas bubbles. This then causes fissuring, resulting in seal failure.

We offer Norsok M-710 Certified Anti-Explosive Decompression (AED), Explosive Decompression Resistant (EDR) O-Rings at very competitive prices. Our wide range of NORSOK approved materials are suitable for a variety of critical services and applications. We supply a range of formulations within the HNBR, Viton B, Viton GLT and FFKM materials that have passed the NORSOK M-710 requirements.

 
General NameChemical DescriptionAbbreviation
EPDM RubberEthylene propylene diene Monomer rubberEPDM
Nitrile RubberAcrylonitrile-butadiene rubberNBR
Neoprene RubberChloroprene rubberCR
HNBR RubberHydrogenated Acrylonitrile-butadiene rubberHNBR
Silicone RubberSilicone rubberVMQ
Thermoplastic ElastomersThermoplastic ElastomersTPE/TPV
PolyacrylatePolyacrylate rubberACM
FluoroelastomerFluoroelastomerFKM

FDA
Compliant for use with Food stuffs

WRAS
Approved for the use of Potable water

COLOURS AVAILABLE
Generally: Black, Blue, Brown, Grey,Green, Red, White & Yellow but others
possible on request.


PEROXIDE CURE
Normally the compounds are not peroxide cured but those shown are available as p.c. on request.

LOW TEMPERATURE
We have shown a guide to the working low temperature of our standardcompounds. Where indicated a specially formulated compound is available to work at lower temperatures.
Any questions for seals, please do not hesitate to contact me. It is our pleasure to be on service of you!

Contact information:
Dongguan Walle Sealing Technology Development Co., Ltd
Tel: 86-769-33291139 / 22762051
Mobile: 13620011767
Fax: 86-769-22762052
URL: walleseals.en.made-in-china.com
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours